SML-25 7.95m Manual Material Lift

Mantall Heavy Industry Co., Ltd. is one of the leading manufacturers and suppliers of SML-25 7.95m Manual Material Lift in China. We warmly welcome you to buy discount SML-25 7.95m Manual Material Lift made in China here from our factory. If you have any enquiry about pricelist and quotation, please feel free to email us.

Choose the Material Lift by the Job, Not Only by Maximum Height

The Mantall SML Series includes four manually operated material lifts:

• SML-10
• SML-15
• SML-20
• SML-25

The models are intended for lifting and positioning materials rather than personnel.

They do not require an external electrical or fuel power source for lifting. A single-speed manual winch is used to raise and lower the load.

The main selection factors are:

Required fork height

Load weight

Load dimensions

Available access space

Required attachment

Frequency of movement between work areas

Four Models for Different Height Requirements

SML-10

Maximum standard fork height: 3.48 m
Rated capacity: 260 kg

This model is suitable when relatively high load capacity is required but the installation height is moderate.

SML-15

Maximum standard fork height: 5.00 m
Rated capacity: 260 kg

SML-15 maintains the same 260 kg rated capacity while providing additional lifting height.

SML-20

Maximum standard fork height: 6.45 m
Rated capacity: 230 kg

This model is intended for projects where additional height becomes more important and a 230 kg rated load is sufficient.

SML-25

Maximum standard fork height: 7.95 m
Rated capacity: 230 kg

SML-25 provides the greatest standard-fork height in the current SML Series and is suitable for higher material-positioning tasks within its rated load limit.

Height and Capacity Should Be Selected Together

The tallest model is not automatically the best choice.

For example, a project requiring a 250 kg load at approximately 5 m should be evaluated differently from a project requiring a 150 kg component at more than 6 m.

Before choosing a model, confirm:

Actual load weight

Required final load height

Fork mounting configuration

Available operating space

Transport route

The selected combination must remain within the applicable rated specifications.

Manual Winch Operation without External Power

All four SML models use a single-speed manual winch.

This makes the series suitable for locations where an electrical power source is unavailable, inconvenient or unnecessary.

Typical environments include:

• Construction interiors
• Equipment installation areas
• Warehouses
• Exhibition halls
• Stages
• Temporary work areas
• HVAC installation locations

The machine still requires an operator to control the lifting process manually.

Standard Fork Configuration

Standard forks are included in the current SML Series configuration.

Depending on the selected model, the maximum standard-fork height ranges from 3.48 m to 7.95 m.

Standard forks are appropriate for many conventional material-positioning tasks where the load can be safely supported by the fork arrangement.

Available Load-Handling Attachments

Different loads may require different support methods.

Current SML Series optional attachments include:

• Adjustable forks
• Flat forks
• Boom attachment
• Load platform

The correct attachment should be selected according to the shape, dimensions and support requirements of the material being lifted.

Adjustable Forks

Adjustable forks are useful when fork spacing needs to be changed for different load widths.

The adjustable configuration can help accommodate suitable equipment, components and installation materials with different support dimensions.

Flat Forks

Flat forks provide a different load-support configuration for appropriate materials.

According to the current specification, flat-fork height data are listed for SML-10 and SML-15.

They should not automatically be advertised as available in the same configuration on every SML model without confirming the selected specification.

Boom Attachment

A boom attachment can be considered when a suspended lifting point is more appropriate than supporting the material directly on forks.

Typical applications may include suitable mechanical equipment or installation components designed for controlled suspended handling.

The load and lifting point must remain within the machine and attachment ratings.

Load Platform

A load platform provides a flat supporting surface for suitable materials that cannot be positioned conveniently on forks.

This can be useful for boxes, equipment assemblies or installation components that require a broader support area.

Compact Storage Width across the Series

All four current SML models have a listed stowed width of approximately 0.79 m.

This relatively narrow storage configuration supports movement and storage in many indoor environments.

Current stowed lengths are approximately:

• SML-10: 0.75 m
• SML-15: 0.75 m
• SML-20: 0.77 m
• SML-25: 0.83 m

Actual doorway and transport dimensions should still be measured before moving the machine through a building.

Operating Footprint

All current SML models extend to approximately 2.20 m operating length.

The listed stabilizer span when lowered is approximately 1.90 m.

This means customers should evaluate not only the stored dimensions but also the space required when the machine is prepared for lifting.

A compact storage footprint does not mean the lift should be operated without sufficient stabilizer clearance.

Low Loading Position

The minimum load height is approximately 0.15 m across the SML Series.

This allows the forks or selected attachment to begin relatively close to floor level when positioning suitable materials.

For many installation tasks, this reduces the amount of manual lifting required before the load is placed onto the material lift.

Where the SML Series Fits Best

Typical applications include:

• HVAC duct installation
• Pipe and cable positioning
• Lighting installation
• Warehouse material positioning
• Mechanical component installation
• Exhibition booth construction
• Stage setup
• Advertising installation
• Industrial maintenance
• Construction material handling

Material Lifting Only

The SML Series is designed for lifting materials.

It must not be used to lift, support or transport personnel.

This distinction is important because a material lift and an aerial work platform serve different purposes and are designed around different operating requirements.

How to Select the Correct SML Model

Choose SML-10 when:

The required fork height is within approximately 3.48 m and up to 260 kg capacity is needed.

Choose SML-15 when:

The job requires up to approximately 5 m standard-fork height while retaining the 260 kg rated capacity.

Choose SML-20 when:

The required standard-fork height increases to approximately 6.45 m and 230 kg capacity is sufficient.

Choose SML-25 when:

The job requires the greatest SML Series standard-fork height, up to approximately 7.95 m, with a 230 kg rated capacity.

Information to Provide for Model Selection

For an accurate recommendation, provide:

• Load weight
• Load dimensions
• Required lifting height
• Required attachment type
• Available access width and height
• Available operating area
• Ground conditions
• Application description

This information makes it easier to select both the correct SML model and the appropriate load-handling attachment.

FAQ

Q: Does the SML Series require electricity?

A: No external electrical power source is required for lifting. The current SML Series uses a single-speed manual winch.

Q: What is the maximum lifting capacity of the SML Series?

A: The current SML-10 and SML-15 models are rated at 260 kg, while SML-20 and SML-25 are rated at 230 kg.

Q: Which SML model provides the greatest lifting height?

A: SML-25 provides the greatest current standard-fork height at approximately 7.95 m.

Q: Can the SML Series lift people?

A: No. The SML Series is intended for material lifting and positioning, not personnel lifting.

Q: What optional attachments are available?

A: Current options include adjustable forks, flat forks, a boom attachment and a load platform, subject to the selected model and configuration.

Hot Tags: SML-25 7.95m Manual Material Lift, China, manufacturers, buy, discount, pricelist, quotation, made in China, Fork Material Lift, Single Speed Winch Material Lift, Fork Single Mast Manlift, Material Lift Manlift, Double Mast Aerial Work Platform, Manual Material Lift