Mantall Heavy Industry Co., Ltd. is one of the leading manufacturers and suppliers of IMP65 6.5m Self-Propelled Vertical Mast Lift in China. We warmly welcome you to buy discount IMP65 6.5m Self-Propelled Vertical Mast Lift made in China here from our factory. If you have any enquiry about pricelist and quotation, please feel free to email us.
Higher Reach in a Compact Self-Propelled Mast Lift
The Mantall IMP65 is designed for maintenance and installation work requiring greater vertical reach while maintaining compact machine dimensions and self-propelled mobility.
With a maximum working height of 6.5 m and a maximum platform height of 4.5 m, the IMP65 provides additional access for elevated maintenance points in warehouses, commercial buildings, factories and other facilities.
The operator can drive, position and lift the machine from the platform, helping improve efficiency during jobs that require frequent movement between work locations.
6.5m Working Height with Compact Dimensions
IMP65 provides a 6.5 m maximum working height while maintaining compact stowed dimensions.
Stowed size:
1.6 m × 1.4 m × 0.8 m
The narrow 0.8 m machine width helps improve access through confined working areas and allows the equipment to operate in locations where larger aerial platforms may be difficult to position.
230kg Platform Capacity
The standard aluminum platform provides a rated lifting capacity of 230 kg.
This allows the operator to carry necessary tools and equipment during maintenance, inspection and installation work.
An optional extendable platform increases the working area to approximately 1.5 m × 0.75 m and provides a rated extension capacity of 115 kg.
Zero Inside Turning Radius
IMP65 features a zero inside turning radius and an outside turning radius of approximately 1.42 m.
This compact steering geometry helps the operator maneuver around equipment, walls and other obstacles in warehouses, workshops and commercial facilities.
Efficient Self-Propelled Mobility
The machine uses proportional lifting and driving controls to provide controlled movement.
Driving performance includes:
• Stowed driving speed up to 4.0 km/h
• Raised driving speed up to 0.7 km/h
• 30% gradeability
• Zero inside turning radius
The ability to reposition the machine while elevated helps reduce unnecessary lowering during suitable maintenance operations.
Easy Operation and Maintenance
IMP65 is equipped with a fault diagnosis system to assist with troubleshooting.
Emergency lowering allows the platform to be lowered if normal power is interrupted, while hydraulic brake release provides additional service convenience.
The proportional lift and drive controls help provide smooth machine operation during daily use.
Integrated Tool Platform
A tool platform is located at the top of the machine structure for temporary placement of commonly used tools.
This allows operators to keep basic maintenance equipment within convenient reach during elevated work.
Indoor-Friendly Mobility
IMP65 uses non-marking solid tires designed to reduce marks on finished floor surfaces.
This makes the machine suitable for applications in:
• Warehouses
• Shopping centers
• Commercial buildings
• Industrial workshops
• Exhibition facilities
• Production areas
• Indoor maintenance environments
Standard Features
IMP65 standard equipment includes:
• Aluminum platform
• Emergency lowering system
• Proportional lifting and driving control
• Diagnosis system
• AC power to platform
• Lowering and tilt alarm
• Double wheel brake
• Hydraulic brake release
• Pothole guards
• Transportation fixing hole
• Wide forklift handling notch
• Non-marking solid tires
Optional Features
Available optional equipment includes:
• Extendable platform
• Motion alarm
• Tool box
• Fiberglass platform
• Equipment protection cover
• Top stop sensor
• Power socket to platform
• GPS
• Overload sensor
• Working flashing light
Recommended Applications
IMP65 is suitable for applications including:
• Warehouse maintenance
• High-level lighting replacement
• Electrical installation
• Commercial building servicing
• Factory equipment inspection
• Production facility maintenance
• Exhibition hall maintenance
• Mechanical installation work
Why Choose IMP65
IMP65 is suitable for applications requiring more vertical reach while retaining compact self-propelled mobility.
Key advantages include:
• 6.5 m maximum working height
• 4.5 m maximum platform height
• 230 kg platform capacity
• Compact 0.8 m stowed width
• Self-propelled driving
• Zero inside turning radius
• 30% gradeability
• Proportional lift and drive controls
• Non-marking solid tires
• Fault diagnosis system
• Optional extendable platform
Operating Safety
Operate the IMP65 only on suitable surfaces and within the machine's specified operating conditions.
Do not exceed the rated platform capacity. Operators should follow the operating manual and applicable local safety requirements when driving, lifting and working at height.
Frequently Asked Questions
Q: What is the maximum working height of IMP65?
A: IMP65 provides a maximum working height of 6.5 m and a maximum platform height of 4.5 m.
Q: What is the lifting capacity of IMP65?
A: The standard platform provides a rated lifting capacity of 230 kg.
Q: Can IMP65 drive while elevated?
A: The machine has a specified raised driving speed of up to 0.7 km/h for controlled repositioning under suitable operating conditions.
Q: What is the turning radius of IMP65?
A: IMP65 has a zero inside turning radius and an outside turning radius of approximately 1.42 m.
Q: Is an extendable platform available?
A: Yes. An extendable platform is available as an optional configuration and provides an extension capacity of 115 kg.
Q: Is IMP65 suitable for indoor applications?
A: Yes. Its compact dimensions, self-propelled mobility and non-marking solid tires make it suitable for many indoor maintenance and installation applications.
| Model | IMP65 |
| Working Height | 6.5 m |
| Platform Height | 4.5 m |
| Platform Size | 0.9 × 0.75 m |
| Platform Size with Extension | 1.5 × 0.75 m |
| Stowed Size | 1.6 × 1.4 × 0.8 m |
| Overall Length with Extension | 1.9 m |
| Ground Clearance | 0.06 m |
| Lift Capacity | 230 kg |
| Lift Capacity on Extension | 115 kg |
| Raising / Lowering Time | 20 / 18 s |
| Driving Speed – Stowed | 4.0 km/h |
| Driving Speed – Raised | 0.7 km/h |
| Gradeability | 30% |
| Turning Radius – Inside | 0 |
| Turning Radius – Outside | 1.42 m |
| Control | Electrical Hydraulic Control |
| Power | DC24V / 225Ah |
| Hydraulic Tank Capacity | 8.5 L |
| Tire | Non-marking Solid Tire 250 × 80 × 200 mm |
| Weight | 1015 kg (European Standard) |
Hot Tags: IMP65 6.5m Self-Propelled Vertical Mast Lift, China, manufacturers, buy, discount, pricelist, quotation, made in China, Aluminium Alloy Platform, Single Mast Aerial Work Platform, 8m Fork Single Mast Manlift, Self-propelled Fork Single Mast Manlift, Self propelled Fork Single Mast Manlift, 230kg Electric Fork Single Mast Manlift