Products
XDW150RT / XDW180RT Heavy-Duty Diesel Rough Terrain Scissor Lift

XDW150RT / XDW180RT Heavy-Duty Diesel Rough Terrain Scissor Lift

The Mantall XDW150RT and XDW180RT are heavy-duty diesel rough terrain scissor lifts developed for large outdoor construction and industrial projects. Both models provide a 570 kg main platform capacity, a 230 kg extension-platform rating and a double-extension deck reaching approximately 6.3 m in total length. The key selection difference is vertical reach and machine logistics: XDW150RT provides 15 m maximum working height at approximately 6950 kg, while XDW180RT extends the working range to 18 m with an operating weight of approximately 8810 kg.

Mantall Heavy Industry Co., Ltd. is one of the leading manufacturers and suppliers of XDW150RT / XDW180RT Heavy-Duty Diesel Rough Terrain Scissor Lift in China. We warmly welcome you to buy discount XDW150RT / XDW180RT Heavy-Duty Diesel Rough Terrain Scissor Lift made in China here from our factory. If you have any enquiry about pricelist and quotation, please feel free to email us.

 

Large Outdoor Projects Need More than Working Height

On a large construction site, elevated work efficiency depends on more than how high a scissor lift can travel.

A work crew may need to carry several technicians, tools and suitable equipment while covering multiple work points along a structure.

If the complete machine must be lowered and repositioned every time the work point moves several meters, project productivity can decrease quickly.

The Mantall XDW Series is designed around a larger working platform, double platform extensions and a six-person rated working configuration.


Two Height Classes for Large Projects

The current XDW Series includes:

XDW150RT – 15 m maximum working height

XDW180RT – 18 m maximum working height

Both models use the same general heavy-duty platform concept.

The correct model should therefore be selected primarily according to the required vertical working range rather than platform capacity, because both current models are rated at 570 kg.


570kg Main Platform Capacity

Both XDW150RT and XDW180RT have a current rated platform capacity of:

570 kg

This capacity supports suitable multi-person outdoor work where technicians need to carry tools and equipment within the rated platform load.

The total load must include:

• All personnel
• Hand tools
• Testing equipment
• PPE
• Suitable installation components
• Other items carried on the platform

The rated load should be calculated before elevation rather than estimated during the job.


Six-Person Working Configuration

Current Mantall specifications list:

Indoor persons: 6

Outdoor persons: 6

for both XDW150RT and XDW180RT.

This makes the XDW Series particularly relevant to projects where several workers need to operate from the same elevated work area.

Actual personnel use must still comply with the total platform load and destination-market certification requirements.


A 3.9m Main Platform for Crew-Based Work

The current XDW platform has an outside main length of approximately:

3.9 m

and an outside width of approximately:

1.9 m

This gives the work crew substantially more usable floor area than a compact service platform.

The large deck can be valuable for tasks involving:

Steel structure work

Facade installation

Mechanical construction

Industrial installation

Large building maintenance

Infrastructure projects

The platform should be organized before elevation so that personnel and tools can work without unnecessary congestion.


Double Extension Platform

One of the defining characteristics of the current XDW Series is the double-extension platform.

The current specification lists:

Main platform length: 3.9 m

Maximum horizontal extension: 1.2 m

Platform length after double extension: approximately 6.3 m

This allows the elevated working deck to cover a significantly larger area than the main platform alone.


Why Double Extension Matters

On a large outdoor project, the chassis cannot always be positioned directly beneath every elevated work point.

Structural members, equipment, trenches, barriers or construction materials may restrict the ideal ground position.

The double-extension platform can provide additional deck coverage from one suitable chassis position.

This may reduce the number of complete machine repositioning cycles required along a work zone.


Work along a Structure, Not Only above One Point

A compact scissor lift is often used to reach one defined vertical work point.

The XDW Series is better suited to another work pattern.

The crew can position the machine beneath a larger section of the structure and use the extended platform area to approach adjacent work locations.

Typical examples include:

Steel-frame installation

Facade panel work

Pipe and cable installation

Large roof structures

Industrial mechanical assembly

Bridge or infrastructure service work

The objective is to increase useful elevated coverage from each machine position.


230kg Extension Platform Rating

The extended platform section has a current rated load of:

230 kg

This rating should be considered separately from the main platform capacity.

Personnel and equipment positioned on the extension must remain within the applicable extension load limit.

The crew should therefore plan where people, tools and components will be located before the platform is raised.


Platform Layout Is a Productivity Decision

For crew-based work, the deck should not simply be loaded until the rated capacity is reached.

A better approach is to organize the platform according to the task.

For example:

Frequently used tools should remain easily accessible.

Heavy items should be positioned according to applicable load requirements.

The extension area should not be overloaded.

Walking space should remain available.

Materials should not obstruct platform access or controls.

Good platform organization helps the crew use the available deck area more effectively.


15m or 18m?

Choose XDW150RT when:

The required maximum working height is within approximately 15 m and the additional height of XDW180RT is unnecessary.


Choose XDW180RT when:

The project requires work points up to approximately 18 m while retaining the large 570 kg platform and double-extension working concept.


Same Capacity, Different Height Strategy

Because both current models have a 570 kg rated platform capacity, the purchasing decision is not mainly about carrying more weight.

It is about matching vertical reach to the project.

This makes XDW selection relatively straightforward:

First determine the highest required work point.

Then confirm the platform load.

Then check access, ground and operating conditions.

Finally select the 15 m or 18 m model.


Outdoor Mobility Supports the Work Cycle

The current XDW Series uses:

4WD × 2WS

Solid rough terrain tires

0.32 m ground clearance

These features support travel across suitable outdoor construction routes.

They are important because a large work platform provides little productivity benefit if the machine cannot reach the required work zones.

Ground suitability should still be evaluated before travel.


Gradeability for Site Access

Current gradeability is listed as:

XDW150RT: 45%

XDW180RT: 40%

These figures relate to travel capability.

They should not be interpreted as elevated working-angle ratings.

Once the machine reaches the work zone, operating tilt and setup requirements must be evaluated separately.


Working Tilt Limits

The current allowable working tilt specifications are:

XDW150RT

Front / rear: 3°

Side / side: 1.5°


XDW180RT

Front / rear: 3°

Side / side: 2°

These values should be considered when establishing the machine for elevated operation.

Travel capability and elevated operating limits describe different conditions.


Optional Automatic Leveling Outriggers

Automatic leveling hydraulic outriggers are available for the current XDW Series.

The listed maximum leveling range is approximately:

Front / rear: 7°

Left / right: 11°

This feature can support machine setup where the applicable site configuration requires additional leveling adjustment.

The leveling range should not be confused with travel gradeability.


Large Work Deck, Large Setup Responsibility

The XDW platform can accommodate a larger crew and broader work area than a compact scissor lift.

That also means work-zone planning becomes more important.

Before elevation, confirm:

• Ground bearing condition
• Chassis position
• Surrounding structures
• Extension direction
• Crew distribution
• Tool and material load
• Overhead obstructions
• Pedestrian and vehicle exclusion area

Planning the elevated work zone before raising the platform can reduce unnecessary repositioning.


Foldable Guardrails for Transport

Current XDW specifications list guardrail-folded heights of approximately:

XDW150RT: 2.19 m

XDW180RT: 2.47 m

With guardrails unfolded:

XDW150RT: 2.99 m

XDW180RT: 3.20 m

The folded configuration is relevant to transport and storage.

The machine must be returned to the correct operating configuration before elevated work begins.


2.3m Stowed Width

Both models have a current stowed width of approximately:

2.3 m

This dimension should be considered when planning:

Construction gates

Temporary roads

Access between structures

Transport equipment

Site traffic routes

A large work platform naturally requires more chassis width than a compact indoor scissor lift.


4.88m Stowed Length with Outriggers

The current headquarters specification lists a stowed length with outriggers of approximately:

4.88 m

for both XDW150RT and XDW180RT.

This makes turning space and transport planning important before mobilization.

The complete machine envelope should be checked rather than only the platform dimensions.


35.3kW Yanmar Diesel Engine

Current Mantall specifications list:

Yanmar 4TNV88

Rated power: 35.3 kW

for both current XDW models.

Diesel power supports independent operation on large outdoor projects where charging infrastructure may not be practical for the required work cycle.


115L Fuel and Hydraulic Capacity

The current specifications list:

Diesel tank: 115 L

Hydraulic system capacity: 115 L

These capacities support the heavy-duty outdoor operating configuration of the XDW Series.

Fuel planning should form part of longer-duration project scheduling.


Machine Weight and Ground Planning

Current machine weights are approximately:

XDW150RT: 6950 kg

XDW180RT: 8810 kg

This difference should be considered when assessing:

Ground bearing capacity

Temporary construction roads

Transport trailers

Loading and unloading

Bridge or slab access

The heavier XDW180RT provides additional working height but also requires greater logistics consideration.


Typical Project: Steel Structure Installation

Large steel structures often require several workers to complete bolting, fitting, alignment or related work along an elevated section.

The XDW platform allows a crew to work together while the double extensions provide additional coverage from one chassis position.

This can reduce repeated lowering, travel and re-elevation cycles.


Typical Project: Facade and Building Envelope Work

Facade installation may require workers to move horizontally along sections of a building.

Where the ground position is suitable, the extended platform can help the crew reach adjacent installation areas without immediately relocating the complete machine.


Typical Project: Industrial Construction

Industrial projects may involve pipework, cable trays, mechanical systems and structural components spread across a large elevated work zone.

The combination of a 570 kg rated platform, six-person configuration and extended deck makes the XDW Series suitable for appropriate crew-based installation tasks.


A Typical Productivity Cycle

Position

Choose a ground position that provides useful coverage of the planned work section.


Load

Prepare the required crew, tools and suitable components within the applicable capacity.


Elevate

Raise the platform to the required work height.


Extend

Use the appropriate platform extension according to the task and load limit.


Complete the Work Zone

Finish as many suitable adjacent tasks as possible from that machine position.


Lower and Relocate

Lower the platform before moving to the next work zone when repositioning is required.

When the XDW Series Is the Right Choice

The XDW Series is particularly relevant when:

• 15 m or 18 m working height is required
• A large outdoor work platform is beneficial
• Multiple technicians need to work together
• 570 kg main platform capacity is sufficient
• Double platform extensions can reduce machine repositioning
• Four-wheel drive is required for suitable outdoor jobsite travel
• The project provides sufficient operating and transport space


Information to Provide before Ordering

Please provide:

  • Required working height
  • Number of workers
  • Total platform load
  • Tool and material requirements
  • Desired extension use
  • Ground conditions
  • Access width
  • Maximum route gradient
  • Need for automatic leveling outriggers
  • Destination market
  • Project application


FAQ

Q: What is the main advantage of the XDW Series?

A: The current XDW Series combines a large 570 kg work platform with a six-person rating and a double-extension platform that can reach approximately 6.3 m total length, making it particularly suitable for crew-based outdoor projects.


Q: What is the difference between XDW150RT and XDW180RT?

A: XDW150RT provides a maximum working height of 15 m, while XDW180RT reaches 18 m. Both current models have a 570 kg main platform capacity and the same double-extension platform concept.


Q: How much weight can the extension platform carry?

A: The current specification lists a 230 kg load rating for the extension platform.


Q: Are automatic leveling outriggers available?

A: Yes. Automatic leveling hydraulic outriggers are listed as an available XDW Series configuration, with current leveling capability of approximately 7° front/rear and 11° left/right.


Q: How many people can work on the platform?

A: Current Mantall specifications list six persons for indoor and outdoor use on both XDW150RT and XDW180RT, subject to rated platform capacity and applicable certification requirements.

Company Profile1compressed

Company Profile2compressed

Maximum Working Height 15 m 18 m
Maximum Platform Height 13 m 16 m
Maximum Horizontal Extension 1.2 m 1.2 m
Minimum Platform Height 1.85 m 2.06 m
Stowed Length – With Outriggers 4.88 m 4.88 m
Stowed Width 2.30 m 2.30 m
Stowed Height – Guardrails Folded 2.19 m 2.47 m
Stowed Height – Guardrails Unfolded 2.99 m 3.20 m
Wheelbase 2.97 m 2.97 m
Ground Clearance 0.32 m 0.32 m
Main Platform Length 3.90 m 3.90 m
Double-Extended Platform Length 6.30 m 6.30 m
Platform Width 1.90 m 1.90 m
Platform Capacity 570 kg 570 kg
Extension Platform Capacity 230 kg 230 kg
Persons – Indoor / Outdoor 6 / 6 6 / 6
Travel Speed – Stowed 5.0 km/h 5.0 km/h
Travel Speed – Elevated 0.7 km/h 0.7 km/h
Raise / Lower Time 68 / 50 s 75 / 55 s
Gradeability 45% 40%
Working Tilt – Front / Rear 3° 3°
Working Tilt – Side / Side 1.5° 2°
Outrigger Leveling – Front / Rear 7° 7°
Outrigger Leveling – Left / Right 11° 11°
Engine Yanmar 4TNV88 / 35.3 kW Yanmar 4TNV88 / 35.3 kW
Machine Weight 6950 kg 8810 kg

Hot Tags: XDW150RT / XDW180RT Heavy-Duty Diesel Rough Terrain Scissor Lift, China, manufacturers, buy, discount, pricelist, quotation, made in China, Large Diesel Scissor Lift For Outdoor Use, 10-18m Diesel Scissor Lift Platform, Diesel Scissor Lift Uneven Ground, Extensible Large Diesel Scissor Lift, 10 18m Diesel Scissor Lift Platform, Custom Diesel Scissor Lift

Send Inquiry