Mantall Heavy Industry Co., Ltd. is one of the leading manufacturers and suppliers of HT410JRT 41m High-Reach Diesel Telescopic Boom Lift with Jib in China. We warmly welcome you to buy discount HT410JRT 41m High-Reach Diesel Telescopic Boom Lift with Jib made in China here from our factory. If you have any enquiry about pricelist and quotation, please feel free to email us.
41m Access Starts with Jobsite Planning
HT410JRT belongs to a very different equipment class from medium-height telescopic boom lifts.
With a maximum working height of 41 m, the machine is designed for large structures and elevated work points that require substantial vertical access.
However, selecting a machine in this height class is not only about checking whether 41 m is enough.
The customer must also determine whether the site can safely accommodate a machine approximately 16.6 m long, 3.55 m wide and 25,500 kg in weight.
For HT410JRT, mobilization planning is part of equipment selection.
Start with the Actual Work Point
The current working envelope provides:
Maximum working height: 41 m
Maximum platform height: 39 m
Maximum horizontal outreach: 18.4 m
Maximum horizontal working range: 19 m
Before selecting the machine, identify both the height of the work point and the horizontal distance from the available chassis position.
A 41 m machine is most useful when the project genuinely requires this height class rather than simply selecting the largest available model.
A 25.5-Ton Machine Requires Ground Assessment
HT410JRT has an operating weight of approximately 25,500 kg.
At this machine size, ground conditions should be reviewed before the equipment arrives on site.
Important considerations include:
• Ground bearing capacity
• Compacted surface condition
• Underground structures
• Utility covers
• Pavement strength
• Temporary access roads
• Working-area slope
• Space available for turning
The machine should not be selected only from working-height data without considering the surface that will support it.
3.55m Width Changes Access Planning
HT410JRT has an overall stowed width of approximately 3.55 m.
This means access routes should be checked well before delivery.
Confirm:
- Gate width
- Site entrance width
- Internal road width
- Turning space
- Clearance around structures
- Temporary barriers
- Stored construction materials
Unlike smaller aerial platforms, a high-reach boom lift of this size may require a dedicated access route through the project site.
16.6m Stowed Length and Turning Space
The stowed machine length is approximately 16.6 m.
The specified inside / outside turning radius is approximately:
7.47 m / 10.8 m
This becomes important on projects where the machine must travel around buildings, steel structures or temporary construction zones.
A route that is wide enough in a straight line may still be unsuitable if sufficient turning area is unavailable.
Site planners should therefore evaluate the complete travel path rather than only the narrowest gate.
41m Working Height for Large Structures
The 41 m maximum working height makes HT410JRT relevant to projects such as:
• Large steel structure construction
• Industrial plant maintenance
• High-rise exterior work
• Large warehouse structures
• Power and utility infrastructure
• Stadium and exhibition facilities
• Major mechanical installation
• High-level structural inspection
The machine is most suitable where lower-height equipment cannot provide adequate vertical access.
19m Horizontal Working Range
HT410JRT provides a maximum horizontal working range of approximately 19 m.
At large project sites, the chassis may need to remain separated from the structure because of:
• Safety exclusion zones
• Existing equipment
• Excavations
• Structural foundations
• Stored materials
• Restricted ground conditions
The available working envelope should therefore be checked against the actual planned machine position.
Jib for High-Level Approach Adjustment
HT410JRT is a jib-equipped model.
At working heights approaching 40 m, final platform positioning becomes important when approaching structural or installation points.
The main boom establishes the primary working position, while the jib provides additional adjustment near the work area.
For this page, however, the jib should be considered part of the overall high-reach configuration rather than the only reason for selecting the machine.
340kg Platform Capacity
The current Mantall China specification lists a rated platform capacity of 340 kg with a maximum platform occupancy of two persons.
The platform measures approximately:
- 2.44 m × 0.9 m × 1.1 m
- The platform load should include:
- Operators
- Tools
- Testing equipment
- Suitable installation components
All loads must remain within the rated capacity and working-envelope requirements.
High-Level Work Should Be Organized before Elevation
At 41 m working height, unnecessary repositioning and repeated full-height operating cycles can consume considerable project time.
Before elevation, the work team should prepare:
• Required tools
• Replacement parts
• Drawings
• Measuring equipment
• Communication equipment
• Work instructions
• Required PPE
Planning the task on the ground can reduce unnecessary platform lowering caused by missing equipment.
360° Continuous Turntable Rotation
The machine provides 360° continuous turntable rotation.
Once positioned in an appropriate working area, the upper structure can serve work points in different directions around the chassis.
This is particularly valuable on large sites where several elevated work areas can be covered from one suitable ground position.
Platform rotation is specified at approximately 180°.
40% Gradeability for Site Travel
HT410JRT has a specified maximum 4WD gradeability of 40%.
This value relates to machine travel capability.
It should not be interpreted as permission to elevate the boom while the chassis remains on a 40% slope.
The current specification lists maximum allowable tilt values of:
Front / rear: 5°
Side / side: 3°
Actual elevated operation must remain within the manufacturer's operating requirements.
Large-Site Mobility
Current specifications list:
Drive / steering: 4×4 / 4×2
Stowed travel speed: 4.2 km/h
Raised travel speed: 0.55 km/h
Ground clearance: 0.52 m
These characteristics support movement across suitable large outdoor jobsites.
Because of the machine's dimensions and weight, travel routes should be reviewed before mobilization rather than improvised after arrival.
Transport Is Part of the Project Plan
HT410JRT should be treated as major project equipment.
Its approximate transport-related dimensions are:
- Length: 16.6 m
- Width: 3.55 m
- Height: 3.8 m
- Weight: 25,500 kg
Transport arrangements depend on destination, route restrictions and local regulations.
For international shipment or domestic site delivery, logistics should therefore be confirmed specifically for the project rather than using a generic shipping statement.
Typical Project: Steel Structure Construction
Large steel structures may require work at multiple elevations across a wide project area.
HT410JRT provides the height needed for upper structural sections while the 360° turntable and jib configuration support platform positioning around the structure.
The site should provide sufficient ground area and bearing capacity for machine operation.
Typical Project: Major Industrial Maintenance
Petrochemical plants, large factories and industrial complexes may contain elevated structural, mechanical and utility systems.
For these applications, the project team should identify the required height, horizontal distance and available machine position before selecting HT410JRT.
Typical Project: Infrastructure Inspection
Large infrastructure facilities can require access to elevated inspection points that are difficult to reach with medium-height equipment.
HT410JRT can be considered when the project requires 40 m-class vertical access and the site can accommodate the machine's dimensions and operating weight.
Before Quoting HT410JRT
For this machine, quotation information should include more than working height.
Please provide:
- Required working height
- Horizontal distance to work point
- Site address
- Available access width
- Ground conditions
- Maximum route slope
- Available turning area
- Platform load requirement
- Number of operators
- Transport restrictions
This information helps determine whether HT410JRT is suitable for both the aerial task and the actual jobsite.
HT410JRT Key Project Data
- Maximum working height: 41 m
- Maximum platform height: 39 m
- Maximum horizontal outreach: 18.4 m
- Maximum horizontal working range: 19 m
- Platform capacity: 340 kg
- Maximum persons: 2
- Overall length: 16.6 m
- Overall width: 3.55 m
- Overall height: 3.8 m
- Machine weight: 25,500 kg
FAQ
Q: What should be checked before choosing HT410JRT?
A: In addition to working height and outreach, customers should confirm ground bearing capacity, access width, turning space and transport conditions because HT410JRT is a large 25.5-ton high-reach machine.
Q: What is the maximum working height?
A: HT410JRT provides a maximum working height of 41 m and a maximum platform height of 39 m.
Q: How wide is HT410JRT?
A: The current specification lists an overall width of approximately 3.55 m, so site entrances and travel routes should be checked before mobilization.
Q: Is the 40% gradeability an elevated working-angle rating?
A: No. The 40% figure describes travel gradeability. Elevated work must remain within the specified machine tilt and operating limits.


Model |
HT410JRT |
Max. Working Height |
41.0 m |
Max. Platform Height |
39.0 m |
Max. Outreach |
18.4 m |
Maximum Horizontal Work Amplitude |
19.0 m |
Stowed Length |
16.60 m |
Stowed Width |
3.55 m |
Stowed Height |
3.80 m |
Wheelbase |
3.80 m |
Ground Clearance |
0.50 m |
Platform Size (L × W × H) |
2.44 × 0.90 × 1.10 m |
Platform Capacity |
300 kg |
Max. Occupants |
2 persons |
Drive Speed, Stowed |
4.5 km/h |
Drive Speed, Raised |
1.1 km/h |
Gradeability (4WD) |
40% |
Turntable Rotation |
360° continuous |
Platform Rotation |
180° |
Max. Tilt Angle (Front-to-Back / Side-to-Side) |
5° / 3° |
Turning Radius, Retracted (Inside / Outside) |
7.47 / 10.80 m |
Turning Radius, Extended (Inside / Outside) |
5.19 / 9.90 m |
Turntable Tailswing |
1.60 / 2.26 m |
Max. Lateral Force (Restricted / Unrestricted) |
400 N |
Max. Wind Speed |
12.5 m/s |
Tire Specification / Type |
445/65-24 solid rubber tires |
Drive Wheels × Steering Wheels |
4 × 4 / 4 × 2 |
Engine |
Cummins QSF2.8T diesel engine, 54 kW |
Hydraulic Tank Capacity |
300 L |
Diesel Fuel Tank Capacity |
230 L |
Total Weight |
25,500 kg |
Hot Tags: HT410JRT 41m High-Reach Diesel Telescopic Boom Lift with Jib, China, manufacturers, buy, discount, pricelist, quotation, made in China, Self propelled Diesel Telescopic Boom Lift With Jib, 14 26m Diesel Telescopic Boom Lift With Jib, Dock Self propelled Telescopic Boom Lift With Jib, 230kg Self propelled Telescopic Boom Lift With Jib




