Mantall Heavy Industry Co., Ltd. is one of the leading manufacturers and suppliers of XE140W 14m High-Reach Electric Scissor Lift in China. We warmly welcome you to buy discount XE140W 14m High-Reach Electric Scissor Lift made in China here from our factory. If you have any enquiry about pricelist and quotation, please feel free to email us.
14m Reach without Moving to a Wider Machine Class
The Mantall XE140W is intended for jobs where vertical reach has become the main selection factor.
It provides a maximum working height of 14 m and a maximum platform height of 12 m, while the machine remains approximately 2.48 m long and 1.15 m wide.
This gives maintenance teams access to substantially higher work points without immediately moving to the larger chassis dimensions used by higher models.
Why the 1.15m Width Matters at 14m
As working height increases, aerial equipment normally becomes larger and heavier.
XE140W keeps the same 1.15 m overall width used by lower models in the XE-W family.
For customers working inside large factories, warehouses, halls or commercial facilities, this can matter when machine access routes are limited by structural columns, passages, production equipment or doorway clearances.
The machine still requires sufficient operating and turning space, but its width remains more manageable than the larger XE160W(II) platform class.
When 12m Working Height Is Almost Enough
Many maintenance projects do not need extremely high aerial equipment, but a 10 m or 12 m machine may still leave the operator short of the required work point.
XE140W adds vertical reach without changing the basic 2.48 m × 1.15 m chassis footprint used by XE120W.
XE120W:
Maximum working height: 12 m
XE140W:
Maximum working height: 14 m
Both:
Overall length: 2.48 m
Overall width: 1.15 m
Rated platform capacity: 320 kg
For customers whose work points are just beyond the practical range of a 12 m machine, XE140W provides an additional 2 m of working height without increasing the basic machine length or width.
320kg Capacity for High-Level Maintenance
XE140W provides a rated main platform capacity of 320 kg and an extension capacity of 120 kg.
At this height class, the purchasing decision is usually less about maximum payload and more about achieving the required vertical access while still carrying personnel, tools and suitable maintenance equipment.
The platform measures approximately 2.25 m × 1.14 m, providing useful space for elevated installation and servicing tasks.
1m Deck Outreach
The platform can extend to approximately 3.25 m in total length and provides up to 1 m of horizontal outreach.
At higher working positions, even a relatively small difference in platform position can require the complete machine to be moved.
The extension deck gives operators additional access to nearby ceiling, lighting, duct, pipe or electrical service points before chassis repositioning becomes necessary.
Typical 14m Work Points
XE140W is particularly relevant to high-ceiling facilities where smaller scissor lifts cannot comfortably reach the required service level.
Typical tasks include:
• High-bay warehouse lighting maintenance
• Factory ceiling electrical work
• Overhead cable-tray installation
• Ventilation and duct inspection
• Fire protection system servicing
• High-level mechanical installation
• Exhibition hall maintenance
• Large commercial facility servicing
• Production plant overhead inspection
Why Choose XE140W Instead of XE80W?
XE80W and XE140W serve very different purchasing priorities.
XE80W is focused on platform carrying capacity:
Working height: 8 m
Rated capacity: 550 kg
XE140W is focused on vertical reach:
Working height: 14 m
Rated capacity: 320 kg
Both use a 1.15 m overall width.
If the job requires more tools and material capacity at moderate height, XE80W is the stronger choice.
If the job requires significantly higher access and 320 kg capacity is sufficient, XE140W is the more appropriate model.
Why Not Move Directly to XE160W(II)?
XE160W(II) provides additional working height, but the machine also becomes larger.
XE140W:
Working height: 14 m
Length: 2.48 m
Width: 1.15 m
XE160W(II):
Working height: 15.7 m
Length: 2.84 m
Width: 1.25 m
XE140W therefore occupies a useful position for buyers who need high vertical access but still want to remain within the smaller 1.15 m-wide XE-W chassis class.
Indoor High-Level Work Positioning
According to the current XE-W specification, XE140W is rated for two persons indoors and zero persons outdoors, with a specified maximum wind speed of 0.
For this reason, this product page should primarily position XE140W for controlled indoor high-level applications rather than market it as an outdoor scissor lift.
Suitable operating conditions must always follow the machine manual and applicable safety requirements.
A Simple Selection Check
XE140W deserves consideration when:
• The required working height is close to 14 m
• A 12 m machine does not provide enough reach
• 320 kg platform capacity is sufficient
• 1.15 m machine width is preferred
• The project involves high-ceiling indoor maintenance
• A larger 1.25 m-wide high-reach machine is not necessary
XE140W Key Figures
Maximum working height: 14 m
Maximum platform height: 12 m
Rated platform capacity: 320 kg
Extension capacity: 120 kg
Overall length: 2.48 m
Overall width: 1.15 m
Platform size: 2.25 × 1.14 m
Extended platform length: 3.25 m
Maximum outreach: 1 m
Indoor / outdoor persons: 2 / 0
FAQ
Q: What is the main reason to choose XE140W?
A: XE140W is mainly selected when 14 m working height is required but the customer still wants to stay within the 2.48 m long and 1.15 m wide XE-W chassis class.
Q: Should I choose XE120W or XE140W?
A: Both models use the same basic length, width and 320 kg rated capacity. XE140W is the better choice when the additional 2 m of working height is necessary.
Q: Is XE140W intended for outdoor use?
A: The current XE-W specification lists two persons indoors, zero persons outdoors and a maximum wind speed of 0. This page should therefore position XE140W primarily for indoor elevated work unless a different certified configuration is confirmed.


| Model | XE140W |
| Max. Platform Height | 12 m |
| Min. Platform Height | 1.5 m |
| Max. Working Height | 14 m |
| Max. Outreach | 1 m |
| Overall Length | 2.48 m |
| Overall Width | 1.15 m |
| Height – Guardrails Folded | 2.08 m |
| Height – Guardrails Unfolded | 2.63 m |
| Wheelbase | 1.85 m |
| Ground Clearance – Pothole Guard Up | 0.10 m |
| Ground Clearance – Pothole Guard Down | 0.028 m |
| Platform Size | 2.25 × 1.14 × 1.25 m |
| Platform Extended Length | 3.25 m |
| Overall Length Extended | 3.4 m |
| Skirting Board Height | 0.15 m |
| Lifting Capacity | 320 kg |
| Extended Platform Capacity | 120 kg |
| Max. Load Number – Indoor / Outdoor | 2 / 0 |
| Drive Speed – Stowed | 3.2 km/h |
| Drive Speed – Raised | 0.7 km/h |
| Rising Time | 61 s |
| Lowering Time | 42 s |
| Gradeability | 25% |
| Tilt Sensor | 3° / 1.5° |
| Turning Radius – Inside / Outside | 0 / 2.3 m |
| Max. Lateral Force – Indoor / Outdoor | 400 N / 0 |
| Max. Wind Speed | 0 |
| Tire | 380 × 127 mm Solid Tire |
| Drive Model | Hydraulic / Electric, 2WD × 2WS |
| Power Unit Motor | 24V / 3.3 kW |
| Hydraulic Tank | 23 L |
| Hydraulic System Pressure | 21 MPa |
| Battery | 220Ah / 230Ah |
| System Voltage | 24V |
| Control Voltage | 24V |
| Charger | 96–265V / 30A |
| Weight – ANSI/CSA | 2690 kg |
| Weight – CE/AUS | 3205 kg |
| Standard | GB / CE |
Hot Tags: XE140W 14m High-Reach Electric Scissor Lift, China, manufacturers, buy, discount, pricelist, quotation, made in China, 350kg Electric Scissor Lift, 6-16m Electric Scissor Lift, Indoor Outdoor Electric Scissor Lift, 320kg Electric Scissor Lift, Small Electric Scissor Lift, Electric Scissor Lift For Maintenance






