XE160W(II) 15.7m High-Reach Electric Scissor Lift

Mantall Heavy Industry Co., Ltd. is one of the leading manufacturers and suppliers of XE160W(II) 15.7m High-Reach Electric Scissor Lift in China. We warmly welcome you to buy discount XE160W(II) 15.7m High-Reach Electric Scissor Lift made in China here from our factory. If you have any enquiry about pricelist and quotation, please feel free to email us.

High-Bay Access for Large Facilities

The Mantall XE160W(II) is designed for facilities where lighting, electrical systems, ventilation equipment and structural service points are located well above conventional maintenance height.

With a maximum working height of 15.7 m and a maximum platform height of 13.7 m, the machine provides vertical access for high-bay warehouses, large production buildings, exhibition halls and other tall indoor facilities.

Rather than focusing on heavy material capacity, XE160W(II) is intended for technicians who need to reach high service points while working from a stable elevated platform.

13.7m Platform Height for High-Level Service Points

The platform itself can rise to approximately 13.7 m.

This makes the machine suitable for work points such as:

• High-bay lighting systems
• Fire protection pipelines
• Roof-level electrical equipment
• Ventilation and duct systems
• Overhead cable trays
• Ceiling-mounted mechanical equipment
• Structural inspection points

For facility operators, the key purchasing question is whether the actual service point falls within the machine's working envelope.

A 2.64m Platform for Maintenance Work

XE160W(II) uses a platform approximately 2.64 m long and 1.12 m wide.

This provides technicians with useful standing and tool space during high-level maintenance.

The platform can extend to approximately 3.54 m in total length, with a maximum outreach of 0.9 m.

Main platform capacity: 250 kg

Extended section capacity: 113 kg

The extended deck can be useful when several nearby service points need to be reached from one machine position.

Designed for Tall Indoor Buildings

The current specification lists two persons for indoor use, zero persons for outdoor use and a maximum wind speed of 0.

XE160W(II) should therefore be considered primarily for controlled indoor environments.

Typical locations include:

• High-bay warehouses
• Aircraft or vehicle maintenance buildings
• Industrial production halls
• Large logistics centers
• Exhibition venues
• Indoor sports or event facilities
• Large commercial service areas

Actual operation must follow the machine manual and site safety requirements.

Access Planning Before Purchase

A high-reach scissor lift must be selected not only by working height but also by building access dimensions.

XE160W(II) measures approximately:

Overall length: 2.84 m

Overall width: 1.25 m

Guardrails folded height: 2.08 m

Wheelbase: 2.21 m

Before purchase, the customer should check entrance width, doorway height, floor loading conditions, turning space and the route from the unloading area to the actual work position.

This is especially important in existing buildings where access routes were not originally designed for aerial work equipment.

High-Level Work Takes Longer to Raise

The platform requires approximately 70 seconds to rise and 45 seconds to lower.

For customers planning repetitive work, this means XE160W(II) is most efficient when several nearby tasks can be completed from one elevated position before lowering.

Good job planning can reduce unnecessary lift cycles during lighting replacement, inspection and facility servicing.

0.9m Outreach for Nearby Work Points

The deck extension provides up to approximately 0.9 m of outreach.

At high working positions, even a small difference between the platform and the service point can require chassis repositioning.

The extension allows the operator to adjust working coverage for nearby ceiling fixtures, cables, ducts or inspection points before moving the complete machine.

Electric Operation for Facility Maintenance

XE160W(II) uses an electric drive system suitable for controlled facility work.

Compared with applications that require combustion-engine rough-terrain equipment, an electric scissor lift is more appropriate where the work is primarily vertical and the operating environment requires cleaner indoor operation.

The machine uses a 24V electrical system and maintenance-oriented electric/hydraulic drive configuration.

Typical XE160W(II) Work Scenarios

High-Bay Warehouse Lighting

The 13.7 m platform height gives maintenance personnel access to lighting fixtures installed near high warehouse ceilings.

Factory Ventilation Inspection

Technicians can use the large platform to inspect elevated ventilation ducts and mechanical service points.

Fire Protection Maintenance

The machine provides vertical access to sprinkler pipelines and fire protection equipment installed near roof structures.

Electrical and Cable-Tray Servicing

The extended platform can provide additional positioning flexibility around overhead electrical systems.

Facility Condition Inspection

Large buildings often require periodic inspection of ceiling structures, suspended systems and high-level components that cannot be reached efficiently using conventional ladders or low-level access equipment.

Before Ordering XE160W(II)

Confirm the following information before model selection:

• Required working height
• Actual service-point height
• Access-door width and height
• Available turning space
• Floor loading conditions
• Required platform load
• Indoor operating environment
• Distance between repeated work points

XE160W(II) Key Specifications

Maximum working height: 15.7 m

Maximum platform height: 13.7 m

Rated platform capacity: 250 kg

Extension capacity: 113 kg

Platform size: 2.64 × 1.12 m

Platform extended length: 3.54 m

Maximum outreach: 0.9 m

Overall length: 2.84 m

Overall width: 1.25 m

Indoor / outdoor persons: 2 / 0

FAQ

Q: What type of facility is XE160W(II) suitable for?

A: It is intended mainly for high-bay indoor facilities such as large warehouses, production halls and other buildings with elevated lighting, electrical, ventilation or inspection points.

Q: What access dimensions should be checked before ordering?

A: Customers should compare the machine's approximately 2.84 m length, 1.25 m width and 2.08 m folded height with the actual doors, passages and turning areas at the job site.

Q: How large is the working platform?

A: The standard platform is approximately 2.64 × 1.12 m and can extend to approximately 3.54 m in total length.

Hot Tags: XE160W(II) 15.7m High-Reach Electric Scissor Lift, China, manufacturers, buy, discount, pricelist, quotation, made in China, 320kg Electric Scissor Lift, Compact Electric Scissor Lift, Self-propelled Electric Scissor Lift, Electric Scissor Lift For Maintenance, Self propelled Electric Scissor Lift, Mini Electric Scissor Lift