XE65N 6.5m Compact Self-Propelled Electric Scissor Lift

Mantall Heavy Industry Co., Ltd. is one of the leading manufacturers and suppliers of XE65N 6.5m Compact Self-Propelled Electric Scissor Lift in China. We warmly welcome you to buy discount XE65N 6.5m Compact Self-Propelled Electric Scissor Lift made in China here from our factory. If you have any enquiry about pricelist and quotation, please feel free to email us.

270kg Capacity in a Compact 0.77m-Wide Scissor Lift

The Mantall XE65N is developed for indoor aerial work where compact access and useful platform capacity are more important than simply choosing the highest working height.

With a maximum working height of 6.5 m, a 270 kg rated platform capacity and an overall width of only 0.77 m, XE65N provides a practical combination of lifting capacity, maneuverability and low-level working efficiency.

It is particularly suitable for maintenance and installation tasks in warehouses, factories, commercial facilities and other areas where larger aerial platforms may be difficult to position.

Higher Capacity without Increasing Machine Width

Feature

XE65N provides a rated platform capacity of 270 kg while maintaining an overall width of only 0.77 m.

Advantage

The compact chassis does not require the operator to move to a wider machine simply to obtain useful platform capacity.

Benefit

For maintenance teams carrying tools, electrical equipment or installation materials, the additional capacity provides greater flexibility while retaining access through confined working areas.

Evidence

Rated platform capacity: 270 kg
Overall width: 0.77 m
Maximum indoor load number: 2 persons

Why Choose XE65N Instead of XE80N?

XE65N and XE80N share the same 1.83 m overall length, 0.77 m overall width, 1.64 m × 0.75 m platform and 0.9 m maximum outreach.

The main difference is how the two machines prioritize working height and platform capacity.

XE65N provides:

• 6.5 m maximum working height
• 270 kg platform capacity
• 11 s rising time
• 8.5 s lowering time
• 30% gradeability

XE80N provides greater working height at 7.8 m, but its rated platform capacity is 230 kg.

For customers whose maintenance points are within the 6.5 m working range, XE65N can therefore provide a higher-capacity solution without increasing the basic machine footprint.

0.9m Outreach for Better Access around Work Points

Feature

The platform provides up to 0.9 m maximum outreach and extends to approximately 2.55 m in total length.

Advantage

The operator can gain additional horizontal coverage from the platform without repositioning the complete machine for every nearby work point.

Benefit

This can improve efficiency when servicing lighting, electrical systems, ventilation components or other facilities positioned above equipment or shelving.

Evidence

Maximum outreach: 0.9 m
Platform length extended: 2.55 m
Extended platform capacity: 115 kg

Faster Lift Cycles for Repeated Maintenance Tasks

Feature

XE65N has an unloaded rising time of approximately 11 seconds and a lowering time of approximately 8.5 seconds.

Advantage

Shorter vertical movement cycles reduce waiting time during jobs that require repeated lifting and lowering.

Benefit

For warehouse inspection, production-line maintenance or facility servicing involving multiple nearby positions, faster platform cycles can help improve daily working efficiency.

Evidence

Rising time, empty load: 11 s
Lowering time, empty load: 8.5 s

Compact Steering for Confined Work Areas

Feature

XE65N combines a 0.77 m machine width with an inside turning radius of approximately 0.8 m.

Advantage

Compact steering geometry helps the operator maneuver around indoor structures, shelving, production equipment and other obstacles.

Benefit

This makes the machine useful where access and positioning space are limited and frequent repositioning is required.

Evidence

Overall width: 0.77 m
Overall length: 1.83 m
Inside turning radius: 0.8 m
Outside turning radius: 1.56 m

30% Gradeability for Jobsite Transfer

Feature

XE65N provides a specified gradeability of 30%.

Advantage

This improves its ability to travel between working areas where suitable ramps or slopes are present.

Benefit

The machine can be easier to relocate around facilities without requiring separate handling equipment for every minor change in floor elevation.

Evidence

Specified gradeability: 30%

Gradeability describes machine travel capability and does not mean that elevated work should be performed on an inclined surface. Elevated operation should follow the operating manual and specified tilt limits.

Extended Platform for Operator and Tools

Feature

The main platform supports 270 kg, while the extended section has a rated capacity of 115 kg.

Advantage

The platform provides useful working space for personnel, tools and suitable maintenance equipment.

Benefit

Maintenance personnel can complete more tasks from one platform position without repeatedly returning to ground level for basic tools.

Evidence

Main platform capacity: 270 kg
Extended platform capacity: 115 kg
Indoor load number: 2 persons

Safety Functions for Indoor Elevated Work

XE65N incorporates operating and safety functions intended to support controlled aerial work.

Relevant functions include:

• Emergency lowering system
• Emergency stop
• Tilt sensing
• Pothole protection
• Proportional lift and drive control
• Automatic braking
• Solid tires

The current specification lists a maximum wind speed of 0, so this page should primarily position XE65N as an indoor maintenance and installation solution rather than describing it as an outdoor-rated scissor lift.

Typical Tasks for XE65N

XE65N is particularly suitable for task-oriented applications such as:

• Warehouse lighting replacement
• Factory electrical maintenance
• Production-line equipment inspection
• HVAC and ceiling service work
• Commercial building maintenance
• Indoor signage installation
• Fire protection system inspection
• Warehouse rack and facility inspection

Who Should Choose XE65N?

XE65N is a good choice when:

• 6.5 m working height is sufficient
• More platform capacity is preferred over additional height
• Access width is limited
• Two-person indoor work is required
• Repeated lifting and repositioning are common
• An extendable platform is useful for nearby work points

Frequently Asked Questions

Q: Why should I choose XE65N instead of XE80N?

A: Both models use the same 1.83 m overall length and 0.77 m overall width. XE65N provides a higher 270 kg platform capacity and faster lift cycles, while XE80N provides greater working height. XE65N is therefore suitable when 6.5 m working height is sufficient and load capacity is more important.

Q: Can two people work on XE65N?

A: The current specification lists a maximum indoor load number of two persons, subject to the total rated platform capacity of 270 kg.

Q: How much load can the extended platform carry?

A: The extended platform section is rated for up to 115 kg.

Q: Is the 30% gradeability intended for working on a slope?

A: No. Gradeability describes the machine's travel capability. Elevated work should be carried out according to the operating manual, tilt limits and required ground conditions.

Q: Is XE65N intended for outdoor work?

A: The current specification lists the maximum wind speed as 0 and specifies two-person indoor loading. For this page, XE65N should therefore be positioned primarily for indoor maintenance and installation applications.

Hot Tags: XE65N 6.5m Compact Self-Propelled Electric Scissor Lift, China, manufacturers, buy, discount, pricelist, quotation, made in China, Mini Electric Scissor Lift, Compact Electric Scissor Lift, Small Electric Scissor Lift, 6-16m Electric Scissor Lift, Warehouse Aerial Electric Scissor Lift, Electirc Scissor Lift With Outriggers