CMP14-S 14m Double Mast Aerial Work Platform for High-Ceiling Maintenance

Mantall Heavy Industry Co., Ltd. is one of the leading manufacturers and suppliers of CMP14-S 14m Double Mast Aerial Work Platform for High-Ceiling Maintenance in China. We warmly welcome you to buy discount CMP14-S 14m Double Mast Aerial Work Platform for High-Ceiling Maintenance made in China here from our factory. If you have any enquiry about pricelist and quotation, please feel free to email us.

A 14m Machine Has Two Different Footprints

CMP14-S is designed for elevated work up to a maximum working height of 14 m.

However, selecting this machine requires checking two different sets of dimensions.

The first determines whether the machine can reach the work area.

The second determines whether there is enough floor space to prepare it for elevated operation.

For high-ceiling indoor work, both questions are equally important.

Transport Dimensions for Building Access

The current CMP14-S overall dimensions are approximately:

Length: 1.60 m

Width: 0.80 m

Height: 1.98 m

These dimensions should be checked against the complete route between unloading and the final work zone.

Relevant restrictions may include:

• Entrance doors
• Interior passages
• Elevator doors
• Service corridors
• Turning corners
• Temporary barriers
• Storage areas

A suitable working height does not help if the machine cannot reach the required location.

Build a 2.50 × 2.10m Work Zone

CMP14-S requires a stabilizer footprint of approximately:

2.50 m × 2.10 m

This operating footprint is significantly larger than the machine's transport width.

For this reason, the final working location should be checked separately from the access route.

A suitable work zone should provide enough room for:

Machine positioning

Full stabilizer deployment

Operator access

Clearance around fixed equipment

Safe separation from surrounding activities

Planning this area before delivery can prevent situations where the machine enters the building but cannot be correctly set up beneath the work point.

14m Reach for High-Ceiling Systems

CMP14-S provides:

Maximum working height: 14 m

Maximum platform height: 12 m

This working range is intended for elevated service points found in larger indoor buildings.

Typical work may involve:

High-bay lighting

Electrical systems

Suspended mechanical equipment

Ventilation systems

Exhibition structures

High-level signs

Warehouse building services

Industrial ceiling installations

The actual service-point height should be measured before selecting the equipment.

A 1.50m-Long Working Platform

The current working platform measures approximately:

1.50 m × 0.70 m × 1.10 m

The 1.50 m platform length provides useful working space for personnel, hand tools and suitable servicing equipment.

This is particularly valuable for maintenance tasks that require the operator to organize several tools or work along a slightly wider elevated service area.

All platform contents must remain within the rated load.

Plan the 200kg Load before Elevation

CMP14-S has a safe working load of:

200 kg

The load calculation should include everything carried on the platform.

This may include:

Operators

Hand tools

Measuring equipment

Testing instruments

Suitable replacement components

Personal protective equipment

A simple planning rule is to calculate the complete working load on the ground rather than estimating it after personnel have entered the platform.

More Height Changes the Load Decision

CMP14-S provides greater working height than the lower CMP-S models, but its current rated capacity is 200 kg.

This means the machine should be selected because the project needs the 14 m working envelope.

It should not be chosen only because it is a higher model number.

Projects requiring heavier platform loads should be checked against the applicable equipment specification before ordering.

Double Mast Structure for Elevated Work

CMP14-S uses a high-strength aluminum double mast configuration.

The mast system works with heavy-duty lifting chains and a steel base structure to provide the vertical lifting arrangement for the personnel platform.

The double mast configuration also supports the larger platform used in the CMP-S product family.

The mast system should be inspected and operated according to the manufacturer's maintenance and operating requirements.

Movement First, Stabilization Second

CMP14-S is a push-around personnel platform.

The operating sequence should therefore be considered in two stages.

Stage 1 – Movement

Move the machine through the selected access route while it is in transport condition.

Stage 2 – Elevated Setup

Position the machine at the work point and correctly deploy the stabilizers before elevation.

This distinction is especially important in warehouses and commercial facilities where passage space may be available but the final service area is surrounded by racks, machinery or fixed structures.

High-Ceiling Warehouse Maintenance

Large warehouses frequently contain lighting, detectors, electrical systems and other building services at significant height.

CMP14-S can provide access to service points within a 14 m working range.

Before deployment, the maintenance team should identify an area where the 2.50 × 2.10 m stabilizer footprint can be established without interfering with racks or material movement.

Exhibition Hall Setup and Service

Exhibition halls combine high ceilings with frequently changing floor layouts.

Temporary booths, stored materials or exhibition structures can reduce the space available for access equipment.

CMP14-S is most practical when the work zone is planned before the exhibition area becomes congested.

This allows the machine to be moved into position and stabilized before surrounding structures restrict the available floor area.

Commercial Atrium and Public Building Work

Atriums and public facilities may contain elevated lighting, decorative structures and suspended electrical equipment.

For these applications, contractors should check:

Service-point height

Floor loading

Access dimensions

Available stabilizer space

Surrounding pedestrian restrictions

This provides a more complete equipment assessment than working height alone.

Industrial Facility Service

Industrial buildings can contain pipework, ventilation systems, cable installations and overhead utilities.

CMP14-S can be considered for suitable high-level service tasks where a portable double mast platform is preferred and sufficient floor area exists for stabilizer deployment.

The work zone should remain separated from surrounding production or vehicle movement according to site safety procedures.

0.80m Width Is a Transport Dimension

CMP14-S has an overall width of approximately 0.80 m.

This helps during movement through suitable indoor access routes.

However, the 0.80 m figure should not be confused with the space required for elevated work.

Once the machine reaches the work point, the 2.50 × 2.10 m stabilizer footprint becomes the more important site dimension.

This distinction should be explained clearly when confirming machine suitability with the customer.

1.98m Overall Height

The current machine height is approximately:

1.98 m

For indoor projects, customers should confirm the lowest overhead clearance along the complete movement route.

Doorway signs, pipes, cable trays, temporary structures or other obstructions may create a lower effective clearance than the nominal building entrance.

1100kg Machine Weight

CMP14-S has a current listed machine weight of approximately:

1100 kg

This should be considered when planning:

Floor access

Elevator use

Loading and unloading

Ramps

Forklift handling

Transport vehicles

The access route must therefore be evaluated for both physical dimensions and machine weight.

AC and DC Configuration

The CMP-S Series supports both AC and DC power configurations.

The current AC power unit is listed as:

220V / 1.5 kW

A 12V / 120Ah battery and 12V / 15A charger are listed for the DC configuration.

The final power arrangement should be selected according to the customer's operating environment and site requirements.

Dual Control Positions

CMP-S provides platform and ground control positions.

This allows the lifting function to be controlled from the platform during normal elevated work and from the ground as part of the machine's operating configuration.

Emergency lowering and warning functions are also included in the current series specification.

When CMP14-S Makes Sense

CMP14-S is particularly relevant when:

• The actual work point requires up to 14 m working height
• A 200 kg platform rating is sufficient
• Approximately 2.50 × 2.10 m floor area is available for stabilizer deployment
• A portable double mast machine is preferred
• The building route can accommodate a 1.60 × 0.80 × 1.98 m machine
• High-ceiling maintenance is performed at planned work zones

Project Information to Confirm

Before recommending CMP14-S, confirm:

• Required working height
• Number of operators
• Combined platform load
• Available doorway dimensions
• Lowest route clearance
• Available stabilizer area
• Floor conditions
• Floor or elevator load limits
• AC or DC preference
• Application type

CMP14-S Site Planning Data

• Maximum working height: 14 m
• Maximum platform height: 12 m
• Safe working load: 200 kg
• Platform size: 1.50 × 0.70 × 1.10 m
• Overall dimensions: 1.60 × 0.80 × 1.98 m
• Stabilizer footprint: 2.50 × 2.10 m
• Minimum ground clearance: 0.04 m
• Machine weight: 1100 kg

FAQ

Q: How much floor space is required to set up CMP14-S?

A: The current specification lists a stabilizer footprint of approximately 2.50 × 2.10 m. This operating area should be checked separately from the machine's transport dimensions.

Q: What is the maximum working height of CMP14-S?

A: CMP14-S provides a maximum working height of 14 m and a maximum platform height of 12 m.

Q: What is the rated platform capacity?

A: The current CMP14-S safe working load is 200 kg, including personnel, tools and other items carried on the platform.

Q: What are the overall machine dimensions?

A: The current specification lists approximately 1.60 m length, 0.80 m width and 1.98 m height.

Q: What should be checked before using CMP14-S indoors?

A: Check the complete access route, floor or elevator loading, required working height and sufficient space for the 2.50 × 2.10 m stabilizer footprint.

Hot Tags: CMP14-S 14m Double Mast Aerial Work Platform for High-Ceiling Maintenance, China, manufacturers, buy, discount, pricelist, quotation, made in China, Double Mast Aerial Work Platform 2 Person, 10 18m Double Mast Aerial Work Platform, Aluminum Double Mast Aerial Work Platform, Movable Double Mast Aerial Work Platform, DC Power Double Mast Aerial Work Platform, 10-18m Double Mast Aerial Work Platform