CMP12-S 12m Two-Person Double Mast Aerial Work Platform

Mantall Heavy Industry Co., Ltd. is one of the leading manufacturers and suppliers of CMP12-S 12m Two-Person Double Mast Aerial Work Platform in China. We warmly welcome you to buy discount CMP12-S 12m Two-Person Double Mast Aerial Work Platform made in China here from our factory. If you have any enquiry about pricelist and quotation, please feel free to email us.

When One-Person Access Is Not Enough

Some elevated maintenance jobs can be completed by one technician with a small tool bag.

Other tasks require two people to work together.

One technician may need to hold or position a component while another performs installation, adjustment or inspection work.

CMP12-S is designed for this second type of application.

The double mast configuration provides a larger working platform and a current safe working load of 272 kg within a 12 m maximum working-height range.

12m Working Height for Two-Person Tasks

CMP12-S provides:

Maximum working height: 12 m

Maximum platform height: 10 m

This working range is suitable for elevated facility systems that require more than low-level access.

Typical work points may include:

• Warehouse lighting
• Electrical installations
• Ceiling equipment
• Building service systems
• High-mounted signs
• Ventilation components
• Industrial facility equipment

The main advantage is that the platform is configured for collaborative work rather than only placing one operator at height.

272kg Safe Working Load

The current CMP12-S specification lists a safe working load of:

272 kg

This gives the platform useful allowance for two technicians together with suitable tools and equipment, provided the complete load remains within the rated limit.

For team-based maintenance, load planning should include:

Operator weight

Tool weight

Testing equipment

Suitable replacement components

All items carried on the platform must be included in the total platform load.

A Larger Working Platform

CMP12-S uses a working platform approximately:

1.37 m long

0.70 m wide

1.10 m high

Compared with a compact one-person basket, this provides more usable standing and working space.

The additional platform area can be important when two technicians need to:

Pass tools

Inspect equipment together

Handle a suitable component

Perform electrical work

Complete coordinated installation tasks

Why Double Mast Construction Matters

CMP12-S uses a double aluminum mast structure.

The two-mast arrangement supports the larger personnel platform and two-person working configuration of the CMP Series.

This makes the machine suitable for applications where a compact single-person basket would provide insufficient working room.

The double mast should therefore be considered part of the machine's working configuration, not simply an appearance difference.

High-Strength Aluminum Mast Structure

The current CMP Series uses high-strength aluminum alloy mast sections.

The aluminum mast structure provides the vertical lifting path while keeping the machine suitable for portable personnel-lift applications.

The mast works together with the lifting chain and steel base structure as part of the elevated working system.

Teamwork at Height

Two-person elevated work can be valuable when a task involves more than simple inspection.

For example:

Electrical Installation

One technician can position or support suitable equipment while the second technician completes the connection or fastening work.

Lighting Maintenance

Two workers can coordinate fixture handling and electrical servicing within the platform's rated capacity.

Inspection Work

Two specialists may need to inspect the same equipment from the platform, particularly when the task combines mechanical and electrical checks.

Component Replacement

Suitable replacement parts and tools can be carried with the technicians when the total platform load remains within 272 kg.

0.80m Overall Machine Width

CMP12-S has an overall width of approximately:

0.80 m

This width helps maintain practical indoor mobility despite the larger two-person platform.

Customers should still check the complete access route, including:

Doorways

Corridors

Elevators

Turning spaces

Final working area

Machine width alone does not guarantee access through every building.

1.98m Overall Height

The current CMP12-S specification lists an overall machine height of approximately:

1.98 m

For building applications, this dimension should be checked against entrance and interior clearance.

A two-person 12 m personnel lift can therefore still be evaluated for indoor facilities where transport height is an important restriction.

Stabilizer Footprint during Work

The compact machine dimensions are not the same as the elevated working footprint.

CMP12-S uses stabilizers during elevated operation.

The current stabilizer deployment dimensions are approximately:

1.90 m × 2.10 m

Before lifting, sufficient floor area must be available for correct stabilizer setup.

Site assessment should therefore answer two different questions:

Can the machine reach the work location?

Is there enough space to deploy it correctly once it arrives?

Platform and Ground Controls

CMP Series standard equipment includes control capability from both the platform and ground positions.

This provides normal platform operation together with ground-level control functionality.

The current standard configuration also includes emergency lowering provisions and a lowering warning buzzer.

Flip-Type Platform Basket

A flip-type platform basket is included among the current CMP Series standard features.

This platform configuration forms part of the machine's transport and operating design.

Operators should follow the prescribed setup procedure when preparing the platform for elevated work.

Folding Access Ladder

CMP-S includes a folding inclined access ladder.

The ladder provides access to the personnel platform when the machine is prepared for operation.

Because CMP12-S is intended for two-person work, safe platform entry and exit should form part of the pre-use setup procedure.

Forklift Handling Provision

The current standard features include a forklift handling device.

This can assist with machine handling during transport, loading or site logistics.

For contractors moving CMP12-S between facilities, the handling method should be planned according to machine weight and available transport equipment.

802kg Machine Weight

The current CMP12-S specification lists a machine weight of approximately:

802 kg

This figure should be considered when checking:

Vehicle loading capacity

Elevator capacity

Floor loading

Ramps

Forklift handling

Transport between buildings

The machine's relatively narrow width does not mean its weight can be ignored during building-access planning.

AC and DC Power Configurations

CMP-S is available in AC and DC configurations.

The current official specification lists an AC power unit of:

220V / 1.5 kW

The series also provides a DC configuration with a 12V battery system.

Where exact DC motor power is required for a quotation or technical sheet, it should be confirmed against the latest technical document before publication.

Non-Marking Tires for Indoor Floors

Polyurethane non-marking tires are included in the current CMP standard configuration.

This is useful for applications where the machine must move across finished indoor flooring.

Possible locations include:

Hotels

Commercial facilities

Warehouses

Exhibition halls

Industrial buildings

Public facilities

Where CMP12-S Fits Best

CMP12-S is particularly suitable when:

• Approximately 12 m working height is required
• Two technicians need to work together
• 272 kg platform capacity is sufficient
• A larger working platform is preferred
• The job takes place mainly in a building or facility
• Stabilizer space is available
• A one-person mast platform would be too restrictive

Typical Scenario: Electrical Installation

An electrical contractor may need two technicians at the same ceiling-level installation point.

One technician can handle positioning or testing while the other completes connections or fastening.

The larger CMP12-S platform is better suited to this collaborative work pattern than a compact one-person basket.

Typical Scenario: Hotel and Commercial Facility Maintenance

Hotels, exhibition facilities and commercial buildings may require coordinated work around lighting, signs and ceiling equipment.

CMP12-S combines a two-person platform with non-marking tires and practical indoor dimensions for appropriate facility applications.

Typical Scenario: Warehouse Maintenance

Warehouse maintenance may involve lighting, sensors, electrical systems and elevated building-service equipment.

Where two technicians need to carry out inspection or servicing together, CMP12-S provides a 12 m working range and 272 kg rated load.

Before Choosing CMP12-S

Confirm:

Required working height

Number of technicians

Combined operator weight

Tool and equipment weight

Doorway dimensions

Available stabilizer area

Floor loading

AC or DC preference

Transport method

Actual work pattern

CMP12-S Key Teamwork Data

Maximum working height: 12 m

Maximum platform height: 10 m

Safe working load: 272 kg

Platform size: 1.37 × 0.70 × 1.10 m

Overall length: 1.48 m

Overall width: 0.80 m

Overall height: 1.98 m

Stabilizer footprint: 1.90 × 2.10 m

Machine weight: 802 kg

FAQ

Q: What is the main advantage of CMP12-S?

A: CMP12-S combines a 12 m working-height range with a larger double-mast platform and a 272 kg safe working load, making it particularly suitable for two-person maintenance and installation tasks.

Q: Can two people work on CMP12-S?

A: The current CMP Series is designed for two-person aerial work, subject to the total safe working load and operating requirements.

Q: How large is the working platform?

A: The current CMP12-S platform measures approximately 1.37 m long, 0.70 m wide and 1.10 m high.

Q: How much space is needed for the stabilizers?

A: The current CMP12-S stabilizer deployment dimensions are approximately 1.90 × 2.10 m.

Q: What is the machine weight?

A: The current specification lists a machine weight of approximately 802 kg.

Hot Tags: CMP12-S 12m Two-Person Double Mast Aerial Work Platform, China, manufacturers, buy, discount, pricelist, quotation, made in China, Movable Double Mast Aerial Work Platform, DC Power Double Mast Aerial Work Platform, 10-18m Double Mast Aerial Work Platform, Double Mast Aerial Work Platform 2 Person, Aluminum Double Mast Aerial Work Platform, 10 18m Double Mast Aerial Work Platform